• Recent Posts

    Schuhby

    Re: Hello again

    Hi Lynn

    Email me please - info@decozo.co.uk

    I think I may have changed your password when I merged your users

    Schuhby 21st September 2017, 21:01 Go to last post
    Schuhby

    Re: Elna pro 664 overlocker

    Hi Lynn

    Email me please - info@decozo.co.uk

    I think I may have changed your password when I merged your users

    Schuhby 21st September 2017, 20:57 Go to last post
    Lilypops

    Elna pro 664 overlocker

    Due to house move I need to reduce the number of machines I have. I do not need two overlockers so am selling this one. It is less than 6 months old,

    Lilypops 21st September 2017, 20:25 Go to last post
    Lilypops

    Hello again

    Hello again everyone. I lost my original log in details when my last laptop was broken. Having tried to reset my password several times and sending

    Lilypops 21st September 2017, 20:13 Go to last post
  • MyDecozo's Spotlight Feature RSS Feed


    Design and create stunning window treatments.

    Whether your style is contemporary, easy-living, country chic or traditional you will find curtain, top treatment, and blind designs to suit you; along with clear and concise make-up instructions.

    Packed with invaluable information, from measuring windows accurately to establishing perfect proportions for pelmets. The Encyclopaedia of Curtains guides you through the whole process of choosing, planning, making and fitting curtains, top treatments, Roman blinds and soft-furnishing accessories.

    Since it was published in 1996, it has been an essential resource for curtain makers around the world. This revised edition has been completely re-written; the tried-and-tested make-up instructions are enhanced by over 500 photographs of soft furnishings made in the Merrick & Day workroom.

    An invaluable resource for those new to the craft, as well as an essential guide for the experienced curtain maker.




    Sometime ago a group of MyDecozo Members got together and made a 22 minute video detailing the making of a lined roman blind. As always we had a great giggle and managed to turn out the video below. We decided Penny would be the face on the video, and then told her! She eventually agreed and as you can see, she did a great job.. Louise is the voice of the video, I did the filming while we all collectively wrote the script.

    This video is aimed at the beginner as we get so many questions relating to the construction of roman blinds.

    Hope you enjoy the video..




    With special thanks to:

    Enid
    Karen C
    Kathy
    Louise
    Penny
    Schuhby
    Tam

    For giving their time, energy and workroom to the making of this video.

    Double sided sticky tape - Tried & tested

    Blind safety summary


    In all cases the components and devices you use must have been tested and passed as compliant with the new safety regulations. For more information check this very useful document by Merrick & Day. If you source your tracks and components from main stream suppliers they will be delivered with all the required labelling, safety devices and instructions. If you prefer to purchase components and assemble your own tracks, you must ensure you use them as described by the supplier otherwise they will not comply with the regulations and in the event of a problem you will be liable. If you are asked to alter or repair an existing blind, consider carefully whether you want to do it. You must not supply any blind which is not compliant.

    Roman blinds on a track

    Rotary track system with operating chain


    1a. Without chain breakaway device – the bottom of the operating chain loop must not be lower than 150cm from the floor. A device must be fitted to retain the loop against the wall.
    1b.With chain breakaway device – the bottom of the operating chain loop must not be lower than 60cm from the floor. A retaining device is not required.
    2. A cord breakaway device must be fitted to the bottom of each cord drop that runs down the back of the blind.
    3. The track must be labelled to show the manufacturer.
    4. The blind must have the required standard safety labels on the operating chain, lifting cords and chain retainer.

    Cord lift track system


    1a. Up to 4 lift cords – where the cords meet at the side of the blind there must be a breakaway concentrator within 50mm of the track (when the blind is down) which convert them to a single pull cord. Alternatively there must be a breakaway toggle at the end of the pull cords so that they separate if any strain is put on the loop created by the toggle.
    1b. 5 cords or more – a standard concentrator may be used to convert them to a single pull cord. This must still be within 50mm of the track when the blind is down.
    2. A cord breakaway device must be fitted to the bottom of each cord drop that runs down the back of the blind.
    3. The track must be labelled to show the manufacturer
    4. Regardless of how many cords the blind uses, a cleat must be fitted at least 150cm above the floor which is large enough to hold all surplus cord when the blind is raised. If there is too much cord for one cleat, then two must be installed (the lowest at least 150cm above the floor) and the cords wrapped around them both.
    5. The blind must have the required standard safety labels on the operating cords, lifting cords and cleat(s).

    Blinds on a wooden batten

    1a. Up to 4 pull cords – where the cords meet at the side of the blind there must be a breakaway concentrator within 50mm of the track (when the blind is down) which convert them to a single pull cord. Alternatively there must be a breakaway toggle at the end of the pull cords so that they separate if any strain is put on the loop created by the toggle.
    1b. 5 pull cords or more – a standard concentrator may be used to convert them to a single pull cord. This must still be within 50mm of the track when the blind is down.
    2. A cord breakaway device must be fitted to the bottom of each cord drop that runs down the back of the blind.
    3. The batten must be labelled to show the manufacturer/supplier.
    4. Regardless of how many cords the blind uses, a cleat must be fitted at least 150cm above the floor which is large enough to hold all surplus cord when the blind is raised. If there is too much cord for one cleat, then two must be installed (the lowest at least 150cm above the floor) and the cords wrapped around them both.
    5. The blind must have the required standard safety labels on the operating cord, lifting cords and cleat(s).

    To read more on this topic and see the discussions our members have on blind safety matters, then visit the ROMAN BLINDS section of the forum.
    Article Preview

    Hi, I’m Judy Heminsley, and I’m here because I met Tamsin online when she won the competition for the best comment on blog ...

    A recent live discussion from the lovely Judy Heminsley who is an advocate for those who are working from home much like ...
    Article Preview

    This great little workroom tool is the ideal solution to the age old problem of cutting fibreglass rods - Something we all hate doing I'm ...
    Article Preview



    1. How did you become a fabric designer?

    I have always been a crafter! Right from being really small, I was fascinated by my nan’s button box, and her old singer treadle sewing machine – she was a tailoress. This led me to study embroidery at Manchester - an unusual choice ...

    Page 1 of 4 1 2 3 4